Kenmore 385.15212 Owner's Manual (Operating Fundamentals) page 53

Twin Needle Stitches (Option)
(_ Stitch selector (for model 15212): 3
Stitch selector (for model 15616): 3 or 9
Stitch selector (for model 15718): 3, 9 or 10
(_ Presser foot: Zigzag foot
Needle thread tension: 1 to 4
@ Stitch length control: 0.5 to 1
@ Stitch width control: 1 to 2.5
@ Needle: Twin needle (optional item)
NOTE: Do not set the stitch width at more than 2.5,
otherwise the needle may hit the needle plate or presser
foot and could possibly break.
@ Upper thread guide
(_) Check spring holder
(_ Thread take-up lever
Needle bar thread guide
@ Twin needle (optional item)
Turn off the power switch. Pull up the additional spool pin.
Place a piece of felt on the additional spool pin. Make sure
you separate the two threads by placing one thread in each
needle bar thread guide(_.
Change the needle to a twin needle@. Thread each needle
from front to back.
When you want to shift the fabric to change the sewing
direction, you must first raise the needle out of the fabric.
®
@
\
s
(b ®
STRETCH
s _ L--0_I_2--3--4
<. >0--1--2--3--4--5c._
@
\
\
\
\
½
®
\
J
56