Kenmore 385.15212 Owner's Manual (Operating Fundamentals) page 57

(_) Mark for placement of buttonhole
(_ Starting point
@Slider
@ There should be no gap.
(_ Spring holder
(_) Difference
[] Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
into the fabric to the starting point
Then lower the automatic buttonhole foot.
Depress the foot control to sew a buttonhole.
[_Remove the fabric and place a pm just before the
bartack at each end, to prevent cutting bartacks. Cut the
opening with the buttonhole opener,
f
[]
[]To repeat buttonhole sewing, turn the stitch selector to
, then back to 0 again, as shown.
Now, simply step on the foot control to sew an identical
buttonhole.
[] When finished, push the buttonhole lever up as far as it
will go.
k-- J
[]
P&T'TE RN _ "''",
/
[]
68