Setting Spool Pins; Presser Foot Lifter; Thread Cutter; Accessory Box - Kenmore 385.15518000 Owner's Manual

Setting Spool Pins
(_) Spool pin
The spool pins are used for holding the spools of thread
when feeding thread to the machine,
To use, pull up the spool pins, Push down for storage,,
Presser Foot Lifter
(_ Presser foot lifter
(_ Normal up position
(_ Highest position
The presser foot lifter raises and lowers the presser foot,
You can raise it about 1/4" (0,6 cm) higher than the normal
up position for easy removal of the presser foot or to help
you place heavy fabric under the foot,
Thread Cutter
0 Thread cutter
You do not need a pair of scissors to cut threads after
sewing_ Just use the built-in thread cutter,
Accessory Box
Open the cover of the accessory box toward you,, Sewing
accessories are conveniently located in the box..
r
f
\\
J
.,.,,
J