ZyXEL Communications omni TA128 User Manual page 55

specified before dialing out. In some cases, it is not possible for the
ISP to support more than one chassis that is capable of bundling
both channels at the same time. With BACP/BAP, the second B
channel's directory number can be obtained while requesting a call.
The second directory number is not necessary any more. The
BACP/BAP is supported on the client side only. The server side of
BACP/BAP will be implemented in an upcoming release.
Related commands:
ATBP0 - Disable BACP/BAP negotiation.
ATBP1 - Enable BACP/BAP negotiation (default).
: The status of BACP/BAP negotiation can't be saved in profile.
O O
NOTE
It's enabled after power on. The status can be changed only by
the power cycle of another ATBP command. AT&F and ATZ
doesn't change the status.
43