ZyXEL Communications omni TA128 User Manual page 162

Command bit dec hex Function and description
S120=
0
1
2
3
4
S124=
S125= bit dec hex
0
150
32 20 Treat the number assigned by
&ZI=n... as sub-address, and
match with the
called_party_subaddress for
inbound call routing
Accumulated charging unit
(MSB byte) for B1 channel
*0 0 Enable POTS port 1 call out.
1 1 Disable POTS port 1 call out.
*0 0 Enable POTS port 2 call out.
2 2 Disable POTS port 2 call out.
*0 0 Enable multi-answering while
TA MSN is not assigned.
4 4 Handle incoming calls
according to AT&Ln setting.
*0 0 If S120.2=1 is set and the
POTS port is busy, calls will
be routed to another POTS
port.
8 8 If S120.2=1 is set and the
POTS port is busy, calls will
be rejected.
*0 0 Enable TA to accept global
calls for a/b adapter and ISDN
data.
16 10 Reject unmatched calls for a/b
adapter and ISDN data.
dec hex Empty IP packet interval for
PPP
0- 0- Units of 1 sec.
255 FF
*0 0 Two POTS and one DTE port.
Ref.
+000