ZyXEL Communications omni TA128 User Manual page 135

Command Options Function & Description
&Cn
&C0
&C1 * CD tracks presence of carrier (See
&Dn
&D0
&D1
&D2 * 108.2, Data Terminal Ready, DTR
&D3
&En
&E0 * 64Kbps
&E1
&F
&Hn
&H0
&H3 * Hardware (CTS/RTS) flow control
&H4
&In
&I0 *
&I1
&I2
Carrier Detect (CD) options
CD always ON (See also S42.7)
also S38.3, S42.7)
Data Terminal Ready (DTR)
options. (See also S25)
Ignore DTR signal, assume DTR is
always ON.
108.1, DTR OFF-ON transition
causes dial of the default number.
(See also 'AT*Dn' and S48.4)
OFF causes the TA to hang up.
Same as &D2 but DTR OFF causes
the TA to hang up and reset from
profile 0.
B channel line speed for ISDN data
call
56Kbps (Default for American
ISDN)
Load factory settings to RAM as
active configuration.
Data flow control, DTE/DCE.
Flow control disabled.
Software (XON/XOFF) flow
control.
Dial up/leased line options.
Dial-up line mode.
Leased line mode for B1 channel.
Leased line mode for B2 channel.
Ref.
S21.4
S21.6-7
S118.2
S27.3-5
123