ZyXEL Communications omni TA128 User Manual page 136

Command Options Function & Description
&I3
&Jn
&J0 *
&J1
&J2
&J3
&Knn
&K00
&K44
&Ln
&L0
&L1
&Mn
&M0 * Asynchronous mode with data
&M1
&M2
&M3
&On
&O0
&O2
124
Leased line mode for B1 & B2
channel.
Bundle selection (See also S100)
Bundle connection is disabled.
Bundle connection is enabled in
answer mode only.
Bundle connection is enabled in call
mode only.
Bundle connection is enabled in
both directions.
V.120/X.75 compression control.
&K must be followed by two digits.
Disable V.42bis.
Enable V.42bis.
Analog port selection during call
answering.
Set priority to analog port, Phone 1.
Set priority to analog port, Phone 2.
Bundle selection (See also S100).
buffering.
Asynchronous command,
synchronous data.
Direct asynchronous mode, no data
buffering.
Synchronous mode.
Set default call type for conventional
dialing commands.
ATDs, ATDPs, and ATDTs default
to make calls for analog adapter,
Phone 2.
ATDs, ATDPs, and ATDTs default
to make ISDN data calls.
Ref.
S87.5-6
S83.2
S84.5
S14b6-7
S83.4-5