Placing A Call For 1Tr6; Leased Line Isdn - ZyXEL Communications omni TA128 User Manual

Use ATDL to redial the last dialed telephone number (and/or
subaddress).

Placing a call for 1TR6

The ATDx[Yn][Nn]destination_address command is used for
dialing as follows.
x = I (ISDN data), A (the analog adapter 1), or B (the analog
adapter 2)
Yn specifies the type of address:
Y0 - unknown (default if Yn is omitted).
Y1 - international number.
Y2 - national number.
Nn is the identifier of numbering/addressing plan:
N0 - unknown (default if Nn is omitted).
N1 - ISDN numbering plan (Rec. E.164).
The destination_address is the ISDN phone number of the called
party. The last digit of this number is the EAZ. Use ATDL to redial
the last dialed ISDN phone number.

Leased Line ISDN

The B-channel protocols supported for the leased line are V.110,
V.120, X.75, PPP and MP which is selected using ATBxx
commands as in the dial-up mode. The following AT commands
are used to select the Leased Line function:
AT&In
AT&I0
AT&I1
AT&I2
86
normal/leased line options S14b2-3.
normal dial-up phone line.
leased line function in B1 channel only, dial-up
function in B2 channel.
leased line function in B2 channel only, dial-up