Replacing The Hinge Cover - Dell Vostro 1710 Service Manual

Hide thumbs Also See for Vostro 1710:
Table of Contents

Advertisement

 Replacing the Hinge Cover
 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
 
NOTICE:
The hinge cover is fragile and can be damaged if extreme force is used. Exercise care when replacing the hinge cover.
This procedure assumes that you have completed the removal procedure
 
1. Align the two tabs underneath both edges of the hinge cover with the corresponding notches in the computer.
 
2. Moving from left to right, press down until the hinge cover snaps into place.
 
3. Close the display and turn the computer to the back.
 
4. Press each hinge cover until it snaps into place.
Back to Contents Page
 
Removing the Hinge
Cover.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents