Removing The Hinge Cover; Replacing The Hinge Cover - Dell Precision M6500 Service Manual

Back to Contents Page
Hinge Cover
Dell Precision™ Workstation M6500 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Hinge Cover

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the battery.
3. Starting from the left edge, gently pry the hinge cover away from the computer.
4. Flip the hinge cover over and place it on the keyboard.
5. Disconnect the cables that connect the hinge cover to the computer.
6. Remove the hinge cover from the computer.

Replacing the Hinge Cover

To replace the hinge cover, perform the above steps in reverse order.
Back to Contents Page
Computer.