Dell Vostro 1710 Service Manual page 29

This procedure assumes that you have completed the removal procedure
1. Slide the keyboard cable connector into the keyboard connector on the system board.
2. Rotate the retaining bracket downward to secure the keyboard cable connector.
3. Hook the tabs along the front edge of the keyboard beneath the front- inside edge of the palm rest.
4. Press on the upper right edge of the keyboard to snap the keyboard into place.
5. Replace the four M2 x 3-mm screws at the top of the keyboard.
6. Replace the hinge cover (see
Back to Contents Page
Replacing the Hinge Cover).
Removing the Keyboard.