Dell Vostro 1710 Service Manual page 42

This procedure assumes that you have completed the removal procedure
1. Connect the power-button pad cable in the connector on the bottom of the multimedia button pad.
2. Replace the power button pad, positioning it under the tabs on the palm rest and aligning the screw hole.
3. Gently reinsert the multimedia-button pad cable underneath the palm rest.
4. Slide the multimedia button pad to the right, aligning it under the tabs on the palm rest and aligning the screw hole.
5. Replace the M2 x 3-mm screw that secures the power button pad to the palm rest.
6. Replace the M2 x 3-mm screw that secures the multimedia button pad to the palm rest.
7. Connect the multimedia-button pad cable to the connector on the system board.
8. Replace the keyboard (see
9. Replace the hinge cover (see
Back to Contents Page
Replacing the Keyboard).
Replacing the Hinge Cover).
Removing the Power Button and Multimedia Button Pads.