Call Logging I/F Card - Panasonic VB-9411ADSUK Operation Instructions Manual

CONNECTION OF OPTIONAL UNITS

CALL LOGGING I/F CARD

Installing the Call Logging I/F Card (VB-9283UK) to the CCU enables the following operations.
(1) Connection of a printer outputs a record of calls (Call Logging).
(2) Connection of a Personal Computer enables programming by a Personal Computer.
NOTE : The necessary communications software must be installed when using the Personal Computer.
I/F Card Specifications
Call Logging
Item
Interface I/F
Output signals
Protocol Communication channel
Baud rate
Parity
Bit lengths Start bit
Data bit
Stop bit
MODEM Baud rate
Mode
Standard
Others Power supply
Current consumption
Installing the
Call Logging
WARNING
Always unplug the AC plug from the outlet and power off the switch (STD BY) of the CCU
when mounting the Call Logging I/F card.
q Make holes at A, B, C shown on the figure using pliers.
w Align the protrusion on the CCU with the hole on the Call Logging I/F Card-A board, and
secure by screw w.
e Align the Call Logging I/F Card-B board with the installation groove on the CCU, and insert
until the Call Logging I/F Card-B board is locked by the claws on the CCU.
r Insert the connector from the Call Logging I/F Card-A board into CN5 on the CCU.
t Attach the EMI filter to the cable.
y Put the cables together into the cable clamp.
Connecting the Printer (Serial Printer)
q Connect the printer via the RS-232C cable referring to the specifications of Table 3 and Figure.
NOTE : For details on the output format of the call record, see programming MODE8 "Communication Parameter Setting".
Connecting the Personal Computer
q Connect the Personal Computer via the RS-232C cable referring to the specifications of Table 3
and Figure.
Table 3. Specifications
RS-232C x 1
1pin: FG, 2pin: TXD, 3pin: RXD, 5pin: CTS, 6pin: DSR, 7pin: SG, 8pin: DCD, 20pin: DTR
Asynchronous, full duplex
1200/4800
EVEN/ODD/NONE
1 bit
7/8 bit
1/2 bit
300 Baud
Full duplex, asynchronous, FSK
CCITT
12V and 5V Supplied from CCU
4mA
I/F Card
I-20
Description