Headset Mode - Panasonic VB-9411ADSUK Operation Instructions Manual

(10-25)12#-
(10-25: Extension No.)
Not Available
(10-25)13#-
(10-25: Extension No.)
Not Available
(10-25)14#-
(10-25: Extension No.)
Not Available
(10-25)15#-(0, 1-3)#
OFF-HOOK SIGNAL
Specify whether to ring OFF-HOOK signal when
receiving an exchange line incoming call during on line
or receiving Call Waiting (Press "3" during the Busy
Tone) during on line.
0#: Cannot accept call waiting
1#: Accepts Exchange line call
2#: Accepts internal calls (Ext.11-25)
3#: Accepts Exchange line and internal calls
(Ext.10)
(10-25)16#-(0 or 1)#
DATA SECURITY
Temporarily prevents an incoming call from overriding
your line, such as when you prevent incoming call from
interrupting a modem transmission.
0#: Disable
1#: Enable
(10-25)17#-(0 or 1)#

HEADSET MODE

Determine whether the headset can be used with your
phone.
0#: Headset mode not available
1#: Headset mode available
(10-25: Ex-
C
tension No.)
(10-25: Ex-
C
tension No.)
(10-25: Extension No.)
P-47
PROGRAMMING (MODE 4)
(10-25)18#-(0 or 1)#
DIAL TONE STOP/INTERNAL
Determine whether the internal dial tone is enabled or
disabled.
0#: Disable
1#: Enable
(10-25)19#-(0 or 1)#
OPERATOR TELEPHONE
Operator teature activates such as operator call "0"
(0411#), operator hold recall (0310#) or operator
transfer recall (0312#) etc.
0#: No Operator function (Ext. 11-25)
1#: Operator function (Ext. 10)
REFERENCE : See MODE 1 0310#, 0312# and 0411#.
(10-25)20#-(0 or 1)#
ADMINISTRATOR'S TELEPHONE
A variety of programmings can be performed
by key operation of a telephone.
Set a telephone to None Administrator's
telephone or Administrator's telephone.
NOTE : Only one Administrator's telephone can be used
in a system.
0#: Regular telephone (Ext. 11-25)
1#: Administrator's telephone (Ext. 10)
(10-25: Extension No.)
(10-25: Extension No.)
(10-25: Extension No.)