Clamping Installing Wire - Panasonic VB-9411ADSUK Operation Instructions Manual

INSTALLATION OF CCU

CLAMPING INSTALLING WIRE

After connecting the Exchange line and the Internal line to the CCU, put those cables out of the
unit at A shown on the figure below. Cut off A using pliers and bundle it with the supplied tie
wrap.
WARNING
Do not bundle key telephone lines, SLT lines and exchange lines together outside the
CCU. Distance of 50cm is required between them to assure proper functioning.
Cut top part first, then bend
bottom part to cut off
local supplied tie wrap
A
I-14
B
A
B