Panasonic VB-9411ADSUK Operation Instructions Manual page 105

Batch Output of Programming Data
When a printer is connected via the optional RS-232C interface, the program settings can be
batch output by operating the administrator's phone.
1
ON/OFF
d
# 9 7
2
d
3 Enter 4-digit ID code (0000-9999).
d
4 Enter output code (0-4).
d
#
5
Output Code
Output Code
0 All set data including program settings
1 All program setting data
2 SSD dial data
3 PSD dial data
4 Extension name, SSD/PSD name and ABM data
NOTE : You can program TTY parameters.
To Enter The Program Mode from Non-Administrator's Phone
Programming can be performed from telephones other than the administrator's phone by press-
ing the following button to change the telephone to the temporary programming telephone.
1
ON/OFF
d
# 9 8
2
d
3 Program ID 4-digit code (initial value is 9999).
d
4
ON/OFF
d
5 Enter the program mode (See page P-3).
(From administrator's phone)
Description
(Finish of assigning temporary administrator's phone).
P-11
BEFORE PROGRAMMING