Power Supply; Using The Battery; Connecting To Socket; Connecting Up To Power Supply - Becker Traffic Assist Z 200 Operating Instructions Manual

>>> GENERAL OPERATION

Power supply

> D
Note:
> GB
You can charge the Traffic Assist via the
car charger cable included in the scope of
> F
delivery or via the optionally-available
> I
mains power supply unit.
When the Traffic Assist is connected to a
> E
PC, it is supplied with power via the PC
and does not consume battery power.
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
22

Using the battery

The internal power supply is via the inte-
grated rechargeable battery. The recharge-
able battery is maintenance-free and does
not require any particular care.
Note:
Note that if the battery is completely dis-
charged, it may take up to a minute be-
fore the device can be switched on again.
Note:
In the event of a defective battery, please
contact your authorised dealer. Please do
not attempt to remove the battery your-
self.

Connecting to socket

!Danger of Death!
Make sure that your hands are not damp
and that the mains section is dry. Only
connect the mains section to a mains
supply with which such purposes are
permitted.

Connecting up to power supply

Connection to the public mains grid is
achieved using the optionally-available
mains power supply unit. Please proceed
as follows to connect to the mains:
> Hold the USB connector at the corru-
gated grip area and push it into the con-
necting socket to the stop without
employing excessive force.