Searching For A Mobile Phone; Connecting From The Device List - Becker Traffic Assist Z 200 Operating Instructions Manual

>>> TELEPHONE MODE

Searching for a mobile phone

> D
Note:
Before searching, activate Bluetooth® on
> GB
the mobile phone to be searched for.
> F
> Open the device list.
> I
> E
> P
> NL
> DK
> Press the
Search for phones
The search starts.
> S
During the search, any devices found are
displayed and the search can be cancelled
> N
by pressing the
Cancel
> FIN
After the search or after pressing the
button, a list of the devices found is
cel
> TR
displayed.
> GR
> PL
> CZ
> H
> SK
88
> Now press on the name of the mobile
phone to be connected.
The Traffic Assist then tries to establish
the connection. The mobile phone should
then prompt you to enter a password.
This password is stipulated by the Traffic
Assist.
button.
button.
Can-
> Enter the displayed password on the
mobile phone.
The connection is established. If the con-
nection is successfully established, the tel-
ephone fast access function is displayed.

Connecting from the device list

You can initiate a connection to a mobile
phone from the device list. If a mobile
phone is already connected, that connec-
tion will be terminated and a connection
will be established to the selected mobile
phone.
> Open the device list.
> Press on the desired mobile phone in
the list.
A connection to the selected mobile
phone will be established. If the connec-
tion is successfully established, the tele-
phone fast access function is displayed.