Dialling An Existing Number - Becker Traffic Assist Z 200 Operating Instructions Manual

Table of Contents

Advertisement

Number list
The number list displays, line by line, all
numbers/names available for fast dialling.
Each line of the number list is divided into
two fields. Each list field is in the form of
a button. The number/name is shown on
the right button and the characteristics of
the entry are shown using the left icon.
Notes:
• The last 50 numbers/names are auto-
matically stored in the number list. If
the storage capacity of 50 numbers is
reached, the oldest number is automat-
ically deleted to make room for a new
number. However, important num-
bers can be protected.
• Entries in fast access mode always only
apply to the time during which the
mobile phone with Bluetooth® wireless
technology was connected to the Traf-
fic Assist. The entries in the fast access
mode of the Traffic Assist are not syn-
chronised with the call lists in the mo-
bile phone.
Icons used
The following icons are used in the
number list:
Icon
Description
This entry is a standard entry
with no special features.
This entry is protected. If the
number list is full, this entry is
not automatically deleted.
This can be performed manu-
ally, if required.
In the case of a protected en-
try, you can also determine
the position using the fast ac-
cess function.
TELEPHONE MODE
Operating in fast access mode

Dialling an existing number

The numbers/names in the number list
can be dialled directly.
Note:
If no telephone has been previously con-
nected, no entry can be dialled.
> Press the button with the desired entry
in order to start the call.
The call will be started.
Scrolling through the number list
Using the
buttons, it is possi-
ble to scroll through the number list in the
direction of the relevant arrow.
The current list page and the total number
of pages appear between the buttons.
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
83

Advertisement

Table of Contents
loading

Table of Contents