Table of Contents
Advertisement
>>>
GENERAL OPERATION
Audio signal output
You can connect your Traffic Assist to
> D
your audio system using an optionally
> GB
available cable for output of the audio sig-
nal.
> F
If the cable is correctly connected, you can
then output the audio signal via the vehi-
> I
cle audio system.
> E
External microphone
> P
You can connect an external microphone
to your Traffic Assist using an optionally
> NL
available cable.
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
26
Switching the Traffic Assist
on/off
The unit is switched on and off using the
key
.
Note:
Please deactivate the Becker moodlights
while driving in your vehicle in order to
prevent visual distraction from the road
traffic!
Switching on
> Set the On/Off switch on the left side of
the unit to On.
> Press the key
for a few seconds.
The unit is switched on. The manufactur-
er's logo appears on the touch screen.
After you have activated PIN protection
(see page 107), the PIN number is then
requested.
> Enter the PIN number using buttons
to
.
Advertisement
Table of Contents
