Mains Power Supply Unit - Becker Traffic Assist Z 200 Operating Instructions Manual

>>> THE TRAFFIC ASSIST
Accessories
> D

Mains power supply unit

> GB This power supply allows connection of
the Traffic Assist to a mains outlet.
> F
Requirements for power supply:
Alternating current
> I
• 100-240 V
> E
0.2 Amps
50-60 Hertz
> P
External microphone
> NL
The internal microphone of the Traffic
> DK
Assist may not be able to achieve satisfac-
tory voice quality if the Traffic Assist is
> S
placed unfavourably in the vehicle.
In these cases, please use the optionally
> N
available external microphone. Please con-
> FIN
sult your local specialist dealer.
Details of the connection can be found
> TR
under "Docking station (optional)" on
page 25.
> GR
Note:
> PL
Connection is only possible using the op-
> CZ
tionally available docking station.
> H
> SK
12
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not in-
cluded in the scope of supply). Please con-
tact your local stockist for more informa-
tion.
Details of the connection can be found
under "Connecting up external antenna"
on page 25.
Docking station
The optionally available docking station
replaces the carrier plate of the Traffic As-
sist included in the scope of delivery.
There are various connections on the
docking station. These connections can be
used to connect the Traffic Assist to an au-
dio system already installed in the vehicle.
Details of the connections on the docking
station can be found under "Docking sta-
tion (optional)" on page 25.
TMC antenna
The dipole antenna for TMC reception
included in the scope of delivery can be re-
placed by the optionally available bow-
shaped TMC antenna.
Details of how to install the bow-shaped
TMC antenna can be found under "TMC
antenna (optional)" on page 24.