Moodlight; Tones; Automatic On/Off; Switching The Function On / Off - Becker Traffic Assist Z 200 Operating Instructions Manual

Moodlight

Using this button, the light bars on the
side can be switched on, switched to red or
blue, or switched off completely.
> Push the button
Mood light
The light bars are controlled accordingly.
Note:
Please deactivate the Becker moodlights
while driving in your vehicle in order to
prevent visual distraction from the road
traffic!

Tones

You can switch the Traffic Assist signal
tones on and off. This can also be effected
by clicking on the display buttons.
> Press
Tones
Depending on the previous setting, the
signal tones are switched on or off. The
current setting is indicated via display of
the relevant icon in colour.
.
• Left icon: Tones switched on
• Right icon: Tones switched off

Automatic on/off

The Traffic
automatically to sleep mode when the
vehicle ignition is switched off.
Prerequisite:
• The Traffic Assist must be connected to
the vehicle cigarette lighter (see also
page 23).
• The cigarette lighter is de-energized
after the ignition is switched off.
• The relevant function can be switched
on at the Traffic Assist.
.
Assist can switch
SETTINGS

Switching the function on / off

> Press .
Automatic on/off
Depending on the previous setting, the
function will be switched on or off. The
current setting is indicated via display of
the relevant icon in colour.
• Left icon: The function is switched on,
the Traffic Assist does switch off auto-
matically.
• Right icon: The function is switched
off, the Traffic Assist does not switch off
automatically.
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
105