Becker Traffic Assist Z 200 Operating Instructions Manual page 117

> Completely discharge the battery (leave the unit switched on with no power suppply until it automatically switches off).
> Remove the four rubber covers
> Unscrew and remove the four housing screws
> Lever off the rear of the housing using a flat-blade screwdriver (levering at the slits at the side of the housing).
> Lever off the battery (bonded to the circuit board) using a flat-blade screwdriver.
> Pull out the plug of the batttery connecting cable.
Note:
Do not reconnect a unit that you have opened to the power supply.
3
4
from the screw holes.
1
using a small cross-slot screwdriver.
2
2 1
3
4
NOTICE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
117