Mains Power Supply Unit; Headset - Becker Traffic Assist Z 201 Operating Instructions Manual

Hide thumbs Also See for Traffic Assist Z 201:
Table of Contents

Advertisement

>>>
THE TRAFFIC ASSIST
USB connection cable
> D
You can connect the unit to a standard
personal computer having a USB interface
> GB
using a USB connecting cable. The 2GB
flash memory of the Traffic Assist can
> F
then be addressed via the PC like a remov-
> I
able storage medium.
> E
Unit bracket
> P
The Traffic Assist can be mounted in the
vehicle using the unit bracket.
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
10
Accessories

Mains power supply unit

This power supply allows connection of
the Traffic Assist to a mains outlet.
Requirements for power supply:
Alternating current
• 100-240 V
0.2 Amps
50-60 Hertz
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not in-
cluded in the scope of supply). Please con-
tact your local stockist for more informa-
tion.
Details of the connection can be found
under "Connecting up external antenna"
on page 19.

Headset

When using the Traffic Assist as an MP3
player, commercially available head-
phones with a 3.5 mm jack or adapter can
be connected (not included).
!Danger!
Prevention of damage to hearing
The use of headphones or ear-
phones over a relatively long
period of time at a high vol-
ume may cause permanent damage to
your hearing.
Conformity with the limits for sound
pressure laid down in the standard NF
EN 50332-1:2000 as required by
French Article L. 5232-1 is guaranteed.
Note:
Headphones must not be used while
driving. Comply with the local national
laws and regulations.

Advertisement

Table of Contents
loading

Table of Contents