12: Multi Tap Delay; 13: Reverse Delay - Roland V-Synth XT Owner's Manual

12: Multi Tap Delay

The effect has five delays. Each of the Delay Time parameters can be
specified as a note length of the selected tempo. You can also set the
panning and level of each delay sound.
fig.MFX-12
Delay 1
L
Delay 2
Multi Tap Delay
Delay 3
Delay 4
R
Delay 5
Parameter Value
Delay 1–5 0–1300 ms, note Specifies the delay time from the
Fbk Dly Time 0–1300 ms, note Adjusts the delay time for the
Feedback #1 -98– +98%
Delay 1–5 Level 0–127
Delay 1–5 Pan L63–63R
Low Damp Freq 50–4000 Hz
Low Damp -36–0 dB
Gain
Hi Damp Freq 2000–20000 Hz
Hi Damp Gain -36–0 dB
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
2-Band
EQ
Description
original sound until each delay
sound (Delay 1/2/3/4/5) is
heard.
feedback sound
Adjusts the proportion of the de-
lay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the volume of each de-
lay sound (Delay 1/2/3/4/5)
Adjusts the pan of each delay
sound (Delay 1/2/3/4/5)
Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
Degree of Low Damp
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
Degree of High Damp
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range

13: Reverse Delay

Adds the reverse of the input sound as the delay sound.
fig.MFX-13
L
Reverse
Delay
R
Parameter Value
Threshold 0–127
Rvs Dly Time 0–650 ms, note
Rvs Feedback -98– +98%
Low Damp Freq 50–4000 Hz
Low Damp -36–0 dB
Gain
Hi Damp Freq 2000–20000 Hz
Hi Damp Gain -36–0 dB
Balance DRY100:0WET–
DRY0:100WET
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
Effects List
2-Band
EQ
Description
Specifies the input level at which
the delay will begin to apply.
Specifies the delay time from the
original sound until the delay
sound is heard.
Adjusts the proportion of the re-
verse delay sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
Degree of Low Damp
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
Degree of High Damp
Volume balance between the di-
rect sound (DRY) and the effect
sound (WET)
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
171