(4 Tap Pan Delay); 38: Mlt Tap Dly (Multi Tap Delay) - Roland JD-XA Parameter Manual

37: 4Tap Delay
This effect has four delays.
L in
Feedback
Quadruple Tap Delay
R in
2 3
1 4
R
L
Parameter Value
Dly 1–4 Sync
msec, NOTE
(Delay 1–4 Sync)
Dly 1–4 Time/
Note 0–2600 ms, note
(Delay 1–4 Time/Note)
Dly 1 Fback #
-98–+98%
(Delay 1 Feedback)
200–8000 Hz,
HF Damp
BYPASS
Dly 1–4 Level
0–127
(Delay 1–4 Level)
Low Gain -15–+15 dB
High Gain -15–+15 dB
D100:0W–
Balance #
D0:100W
Level 0–127

(4 Tap Pan Delay)

Balance D
Delay 1
Balance W
Delay 2
Delay 3
Balance W
Delay 4
Balance D
Explanation
msec:
The Dly 1–4 Time value is
specified in msec.
NOTE:
The Dly 1–4 Time value is
specified as a note value.
Adjusts the time from the direct
sound until delay sounds 1–4 are
heard
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) values invert the phase.
Adjusts the frequency above which
sound fed back to the effect is
filtered out.
If you do not want to filter out any
high frequencies, set this parameter
to BYPASS.
Volume of each delay
Amount of low-range boost/cut
Amount of high-range boost/cut
Volume balance between the direct
sound (D) and the delay sound (W)
Output volume
38: Mlt Tap Dly
This effect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can
also set the panning and level of each delay sound.
L out
L in
Feed
back
R out
R in
Parameter
Dly 1–4 Sync
(Delay 1–4 Sync)
Dly 1–4 Time/
NOTE
(Delay 1–4 Time/Note)
Dly 1 Fback #
(Delay 1 Feedback)
HF Damp
Delay 1–4 Pan
Dly 1–4 Level
(Delay 1–4 Level)
Low Gain
High Gain
Balance #
Level
39
(Multi Tap Delay)
Balance D
Delay 1
Balance W
Delay 3
Multi Tap Delay
Balance W
Delay 4
Delay 2
Balance D
Value Explanation
msec: The Dly 1–4 Time value is
specified in msec.
msec, NOTE
NOTE: The Dly 1–4 Time value is
specified as a note value.
Adjusts the time from the direct
0–2600 ms, note sound until delay sounds 1–4 are
heard
Adjusts the amount of the delay
sound that's fed back into the effect.
-98–+98%
Negative (-) values invert the phase.
Adjusts the frequency above which
sound fed back to the effect is
filtered out.
200–8000 Hz,
BYPASS
If you do not want to filter out any
high frequencies, set this parameter
to BYPASS.
L64–63R Stereo location of each delay
0–127 Volume of each delay
-15–+15 dB Amount of low-range boost/cut
-15–+15 dB Amount of high-range boost/cut
D100:0W– Volume balance between the direct
D0:100W sound (D) and the effect sound (W)
0–127 Output volume
Effects
2-Band
L out
EQ
2-Band
R out
EQ