Warning Screens - Roland V-Synth XT Owner's Manual

Message List
Message
SAMPLE EDIT
Memory Full!
SAMPLING
Memory Full!

WARNING Screens

If a WARNING screen appears, follow the procedure described in the corresponding "Action."
Message
CHANGE USB MODE
USB Mode Will Be Changed.
COPY FILE/FOLDER
Are You Sure?
DELETE FILE/FOLDER
This Will Clear the File(s)/Folder(s).
Are You Sure?
DISCONNECT USB
Disconnection Will Be Done Before
Ejecting.
Are You Sure?
EDITED DATA EXISTS
If You Need This Data, Save Immedi-
ately.
FILE/FOLDER EXISTS
Overwrite Existing File/Folder?
FORMAT
All Data on the Disk Will Be Lost.
Are You Sure?
IMPORT FILE
Are You Sure?
INITIALIZE PATCH
Are You Sure?
LOAD DEMO
Replace All Data.
Are You Sure?
LOAD PROJECT
Are You Sure?
MOVE FILE/FOLDER
Are You Sure?
OTHER SAMPLE EXISTS
Number '****' Already Contains a
Sample.
Clear Existing Sample?
PROJECT NOT FOUND
Internal Project Was Loaded.
SAMPLE EDIT
Copy Buffer Not Avail.
Are You Sure?
SAMPLE EXISTS
Overwrite Existing Sample?
SAVE PROJECT
Are You Sure?
198
Meaning
There is not enough wave memory to execute the
wave editing operation (Insert, Zero Insert, Region,
Paste).
Since the wave memory has become full, the opera-
tion was halted.
Meaning
USB mode will be changed.
The file(s) or folder(s) will be copied from the disk.
Is it OK to execute?
The file(s) or folder(s) will be deleted from the disk.
Is it OK to execute?
Will disconnect before ejecting. Is it OK to execute? Perform the Eject operation on your computer.
The V-Synth XT contains an unsaved patch or sam-
ple.
There is an identically named file or folder at the
copy- or move-destination.
When you format, all data on the disk will be lost. Is
it OK to execute?
The file(s) will be imported from the disk. Is it OK
to execute?
The patch will be initialized. Is it OK to execute?
When you load the demo data, all data in the VP-
9000 will be lost. Is it OK to execute the operation?
Project will be loaded. Is it OK to execute the oper-
ation?
The file(s) or folder(s) will be moved from the disk.
Is it OK to execute?
A different sample already exists in the selected
sample number '*****'.
Cannot find the project specified as the current
project. The internal project was loaded.
When you perform the Cut or Clear sample editing
operation, the data is simultaneously copied as
well. However, this message indicates that in this
case, there is insufficient memory remaining to
copy the data. Do you still want to execute the Cut
or Clear? (Since a copy will not be made, you will be
unable to restore the data simply by pasting it back.
The Cut or Clear operation can still be carried out,
though.)
Sample exists in the copy- or move-destination.
Project will be saved. Is it OK to execute the opera-
tion?
Action
Delete unneeded samples from the V-Synth XT (p.
109).
Delete unneeded samples from the V-Synth XT (p.
109).
Action
Exit any USB MIDI-related applications on your
computer.
To cancel the operation, touch <CANCEL>. To exe-
cute the operation, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the operation, touch <EXECUTE>.
If you need the patch or sample, save it now. Touch
<ACCEPT> to erase the message.
To cancel the operation, touch <CANCEL>. To exe-
cute the copying or moving operation, touch <EXE-
CUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the formatting operation, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the importing operation, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the operation, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. If you
wish to load the demo data, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. If you
wish to load the project, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the operation, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. If you
wish to overwrite the sample of the selected num-
ber, touch <EXECUTE>.
Touch <ACCEPT> to erase the message.
To cancel the operation, touch <CANCEL>. If you
also want to Copy the data, shorten the range being
Cut or Cleared (p. 115), or delete unneeded samples
from the V-Synth XT (p. 109). To execute the Cut or
Clear operation, touch <EXECUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the copying or moving operation, touch <EXE-
CUTE>.
To cancel the operation, touch <CANCEL>. To exe-
cute the operation, touch <EXECUTE>.