Mixing/Modulating Two Sounds (Mod) - Roland V-Synth XT Owner's Manual

Mixing/Modulating Two Sounds (Mod)

The Modulator mixes and modulates the two audio signals.
Selecting a Modulator Type
1
In the lower part of the screen, touch <Mod>.
A screen like the following appears.
fig.Q-32_60
2
In the Modulator Type area, select the modulator type you wish to use.
Modulator Type
MIX
RING
FM
ENV RING
OSC SYNC
Description
Add OSC1 and OSC2.
Use OSC2 to apply ring modulation to OSC1.
Use OSC2 to apply FM (frequency modulation) to OSC1.
Use the envelope of OSC2 to control the volume of OSC1.
Synchronize the output waveform of OSC1 to the output
waveform of OSC2.
Creating a Patch
OSC SYNC is valid only when
OSC2 is an analog oscillator.
For more about the modulator
settings, refer to "Mixing/
Modulating Two Sounds
(MOD) "(p. 93).
47