Isdn Call Statistics Table View - Motorola 68384 - Vanguard 320 Router User Manual

S P E C T R U M E n t e r p r i s e M a n a g e r
Speed
The speed of the port when clocking is internal or
the detected clock speed if clocking is external.
UtilIN
Percentage of port bandwidth in use for incoming
traffic.
UtilOut
Percentage of port bandwidth in use for outgoing
traffic.
MaxSVC
Maximum number of Switched Virtual Circuits in
use since last node, port or statistics reset.
CurrentSVC
Current number of Switched Virtual Circuits in
use.
The following two buttons are located at the
bottom of the X.25 Statistics Table:
ISDN Call Statistics
This button accesses a table providing ISDN call
statistics for each X.25 SVC port—see
Statistics Table View (Page
ISDN Call
56).
DATA Statistics
This button accesses a set of table providing
traffic breakdowns by character, frame, and
packet for each X.25 port—see
View (Page 58).

ISDN Call Statistics Table View

Access: In the X.25 Statistics Table view, click the ISDN Call
Statistics button.
This view contains a table that provides ISDN call
statistics for each X.25 port. These statistics are
only valid for (virtual) switched data ports.
Column headings are as follows:
PortNo
Identifies a particular X.25 port.
NumRx
The number of inbound calls that were attempted
since the last statistics reset.
RxReject
The number of inbound calls that were rejected
since the last statistics reset.
RxLastFail
Code indicating the reason the last inbound call
was rejected, as shown in the following table:
56 of 95
M o t o r o l a V a n g u a r d D e v i c e s
Data Statistics