Motorola 68384 - Vanguard 320 Router User Manual page 67

S P E C T R U M E n t e r p r i s e M a n a g e r
Node Address
This is the main part of the X.25 network address
for this node. Incoming calls with this value as
the first part of the network address are routed to
this node. The subaddress portion of the network
address (Control Port Subaddress, etc.) routes
the incoming call to a specific destination in the
node.
Node Date Stamp
Date used for date stamps of events and traps, in
yyyymmmdd format.
Chassis Type
Identifies the chassis type of the node. Possible
values are "standalone," "modulus8,"
"modulus18," "modulus9" "modulus19," and
"chassis6520."
Maximum Routing Hops
The maximum number of nodes a call may pass
through before reaching its destination.
Max simultaneous calls
The maximum number of simultaneous calls.
Limiting the number of calls eliminates data loss
in extreme traffic conditions. A value of zero
indictaes unlimited calls.
Time Stamp
The node time, in hhmmss format, used for time
stamps of events and traps.
No. of Broadcast Networks
The number of Broadcast Networks to which this
node can send broadcast messages. A value of
zero means the the broadcast functionis disabled
for this node.
Broadcast Port Subaddress
The broadcast subaddress for this node.
Incoming broadcast messages with network
address consisting of the Node Address and this
Broadcast Port Subaddress arrive at this port in
this node. No Routing Table entry is needed.
No. of Broadcast Input Chans
The number of simultaneous broadcast messages
that can be received.
Ctrl Port Idle DisconnectTime
The number of minutes of inactivity that can
occur before the control terminal is automatically
disconnected.
Control Port Subaddress
The Contol Terminal Port (CTP) subaddress for
this node. Incoming calls with a network address
consisting of the node address for this node and
this Control Port Subaddress arrive at this node's
CTP.
67 of 95
M o t o r o l a V a n g u a r d D e v i c e s