Table of Contents
Advertisement
S P E C T R U M E n t e r p r i s e M a n a g e r
MaxPVCChan
The maximum number of logical channels that
can be used for Permanent Virtual Circuits on
this X.25 link. The total number of PVC and SVC
channels on a link should be kept as small as
possible and consistent with needs. PVC
connections must be configured in the PVC Table.
StartPVCChan
The starting logical channel number for the
Permanent Virtual Circuits on this link. Not used
if the value of MaxPVCChan (see above) is zero.
MaxSVCChan
The maximum number of logical channels on this
link that can be used for Switched Virtual
Circuits.
StartSVCChan
The starting logical channel number for the
Switched Virtual Circuits on this link.
T1Retry
The T1 link retry timer value in tenths of a
second.
T4Poll
The time, in tenths of a second, that an idle link
will be probed for assurance of connection to the
remote device. A value of zero indicates the timer
is disabled. If enabled, this poll time value must
be greater than the value of T1Retry (see above).
Restart
The number of seconds before a restart request
will be repeated.
Reset
The number of seconds before a reset request will
be repeated.
Call
The number of seconds before a call will be
cleared.
Clear
The number of seconds before a clear request will
be repeated.
Bridge Configuration
Information View
Access: From the Icon Subviews menu for the
MotBridgeApp Application icon, select Bridge
Configuration.
In addition to providing button access to a
number of subviews, the Bridge Configuration
Information view contains the following three
defined areas:
• Base Port Info
• STP Port Info
• Base Port Configurables
78 of 95
M o t o r o l a V a n g u a r d D e v i c e s
Advertisement
Table of Contents
