Table of Contents
Advertisement
S P E C T R U M E n t e r p r i s e M a n a g e r
Codex Group Facility
The facility used in call packets on Codex 6500
links for passing CODEX PRIVATE facilities other
than Hop Count and DCP facilities between 4.xx
nodes. This should be the SAME on all nodes in
the network. It need only be changed if it
interferes with some other private network
facility.
Codex Proprietary Protocol ID
This value is put in the first byte of the Protocol
Identifier field of the CUD in the Call Request
packets for protocols that have not been assigned
a standardized value by the CCITT.
Link - Max Frame Size
The largest datalink level frame that will ever be
received on any link. On WAN links this does not
include space that is reserved internally for
trailers.
DCP Facility Code
This value is used in call request and call accept
packets on X.25 links to carry DCP information at
call setup and reconnection time. The code must
be the same for all nodes in the network. The
default value should be changed only when it
interferes with some other facility. This value
must not be the same as the Hop Count facility.
RouteLanSubaddr
Calls with network address composed of the node
address and this subaddress will be routed to a
LAN Connection in this node.
Alarm Selection
Specifies the types of alarms and events that are
reported by the node. Possible values are "none,"
"low," "medium," "high," "conn" (connection
events), and "code" (alarms from Codex 6000
Statistical Multiplexer devices).
X.25 Configuration Table View
Access: From the Icon Subviews menu for the MotX25App
Application icon, select Configuration Table.
This view contains a table that displays general
configuration information about the device's X.25
ports. Buttons at the bottom of the view access
separate tables for PDN information and statistics
on calls, packets/frames, and logical
links/timers. Column headings for general
statistics are as follows:
PortNo.
Identifies a particular port on the modeled device.
ConnType
Numeric code indicating the control signal
handshake and clocking requirements for a
70 of 95
M o t o r o l a V a n g u a r d D e v i c e s
Advertisement
Table of Contents
