Table of Contents
Advertisement
S P E C T R U M E n t e r p r i s e M a n a g e r
Base Port Info
This area of the Bridge Configuration Information
view includes the following user-configurable
settings:
Wan Data Priority
This menu button lets you set the transmission
priority for bridged data over the WAN as low,
medium, or high.
Learn Period (sec)
The time in seconds that a bridge will be
prevented from forwarding frames after the
Forwarding is cleared due to node boot.
Bridged Protocols
This menu button lets you specify the routable
protocols that are allowed to be bridged. Possible
settings are IP, IPX, IPIPX, or None.
Virtual Ring Number
Number identifying a virtual ring (used to support
the LSS in its path trace function and in IP
tunneling for Token Ring networks.
Max Bridge Links
The maximum number of bridge links that will be
allowed.
STP Port Info
This area of the Bridge Configuration Information
view displays the following settings:
Stp Control
"Auto" indicates that the bridge participates in
STP and automatically calculates the STE (Single
Route Broadcast) frame path. "Man" indicates the
spanning tree is manually configured via the
Configure Bridge Link parameter.
Bad Hello Threshold
If the Stp Control value described above is set to
"Man," an event (report) is generated when the
number of Bad Hellos exceeds this value.
Bad Hello Timeout
The amount of time in minutes between Bad Hello
counter resets.
Base Port Configurables
This area of the Bridge Configuration Information
view is a table of user-configurable settings for
each port associated with the device's bridging
functions. Column headings are as follows:
BaseIndex
Number identifying a particular port.
79 of 95
M o t o r o l a V a n g u a r d D e v i c e s
Advertisement
Table of Contents
