The Precisionhd Camera 1080P2.5X - Cisco PrecisionHD 1080p12x User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

The PrecisionHD Camera 1080p2.5x

Only available as a part of the Cisco TelePresence SX20 Quick
Set. Spare PID: CTS-PHD-2.5X=
The camera can be mounted on a screen with the camera bracket
that is part of the SX20 Quick Set bundle, or it can stand on an
even surface. The image flips automatically.
HDMI and Camera Control
Video Out
• HDMI is the video out source.
• The maximum resolution is 1080p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
For future use.
USB
For future use.
Pulsating –——– –——– –——– –——–
Blinking — — — — — — — — — — —
Flickering •••••••••••••••••••••••••••••••••
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
The Physical Interface The Physical Interface Connecting the Camera
9
Daisy Chaining
HDMI Video out,
camera control
Power
and power
USB supply
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
User Guide
Video Output Format Appendices
The LED is continuously lit when the system
is in use. It flickers when the system receives
signals from the remote control and blinks
when rebooting. The LED pulsates when
the system is in Standby mode.
The LED is lit during a call.