Sx20 Codec Configurations; Codec C20 Configurations; Codec C40 Configurations - Cisco PrecisionHD 1080p12x User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

SX20 Codec configurations

Connecting to the PrecisionHD Cameras 1080p4x S2
and 1080p2.5x
Connect the combined custom HDMI and camera control cable:
• From the HD VIDEO OUT connector on the camera.
• To the CAMERA connector on the SX20. Visca™ protocol
is supported.
Connecting to other PrecisionHD Cameras
Connect the combined custom HDMI and camera control
split cable:
• From the HD VIDEO OUT (HDMI) connector on the camera.
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA connector on the SX20. Visca™ protocol
is supported.
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
The Physical Interface

Codec C20 configurations

Camera HDMI and
camera contol
Connecting to the PrecisionHD Cameras 1080p12x
and 1080p4x
Connect the HDMI cable:
• From the HD VIDEO OUT
• To the CAMERA
Connect the camera control cable:
• From the
camera.
• To the CAMERA CONTROL
Codec C20. Visca™ protocol is supported.
Connecting the Camera Connecting the Camera Daisy Chaining
Camera Camera
control HDMI
(HDMI) connector on the camera.
(HDMI) connector on the Codec C20.
CODEC CONTROL IN (RJ45) connector on the
(RS–232) connector on the
12
Video Output Format

Codec C40 configurations

HDMI 1
Connecting to the PrecisionHD Cameras 1080p12x
and 1080p4x
Connect the HDMI cable:
• From the HD VIDEO OUT (HDMI) connector on the camera.
• To the HDMI 1 IN (HDMI) connector on the Codec C40.
Connect the camera control cable:
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C40.
Codec connectors
1 Output connector
Input connector
1
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
User Guide
Appendices
Camera
control