The Precisionhd 1080P 12X Camera - Cisco PrecisionHD 1080p 12X User Manual

Telepresence precisionhd camera
Hide thumbs Also See for PrecisionHD 1080p 12X:
Table of Contents

Advertisement

Cisco TelePresence PrecisionHD Camera
Contents
Introduction

The PrecisionHD 1080p 12X camera

The orange LED illuminates while in
a call and flickers when there is an
incoming call.
The green LED is continuously
illuminated when power is On,
but it flickers when receiving
signals from the remote control.
When mounted (upside down)
in the Profile 65" and the Profile
65" Dual, the LED is not visible.
D14640.04 PrecisionHD 1080p-720p Camera User Guide
© 2010-2011 Cisco Systems, Inc. All rights reserved.
The physical interface
The physical interface
The lens hood is
detachable.
We recommend that you
mount it to prevent stray
light from disturbing your
video experience.
Snap it on gently.
HDMI and HD-SDI
HDMI is the main video source. The maximum resolution
is 1080p60.
HD-SDI* is the secondary video source. The maximum
resolution is 1080p30.
The HDMI and HD-SDI* can be used simultaneously. The
maximum resolution is 1080p30, if you want both to run
with the same resolution.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
When the camera is used with a Cisco Codec, power will
be supplied through Camera Control cable.
When the camera is used with non-Cisco codecs, you
may have to connect power separately.
, July 2011
.
Connecting the camera
Video output formats
Power
Camera
Supply
Control
Extra Camera
Out and for daisy
chaining*
6
PrecisionHD Camera User guide
Daisy chaning
Ethernet
HDMI
RJ45
Video Out
HD-SDI Out*
Extra camera
For multi-camera setup, e.g. when you connect cameras in
daisy chain*:
The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
Use an extra camera cable between the Extra Camera
sockets.
Ethernet
For software upgrades on daisy chained cameras. Requires
software version TC3.0 or higher on the Codec C–series.
Kensington lock
The Kensington lock may be used to prevent the camera to
be moved from its place or to prevent theft.
* Not supported with Codec C20.
Appendices
Kensington lock
www.cisco.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Precisionhd 1080p 4xPrecisionhd 720p

Table of Contents