The Precisionhd Camera 1080P4X - Cisco PrecisionHD 1080p12x User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

The PrecisionHD Camera 1080p4x

Part number: CTS-PHD-1080P4XS=
HDMI and Camera Control
HDMI video out
• HDMI is the video out source.
• The maximum resolution is 1080p30/720p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy-chain control is not supported. The camera can be used
in a chain of multiple cameras, but only as the last camera in
the chain.
Power
• When the camera is used with a Cisco Codec, power is
supplied through the Camera Control cable.
• When the camera is used with non-Cisco codecs, you may
have to connect the power separately.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
CAUTION! Do not pan or tilt the PrecisionHD 1080p4x camera
by hand!
NOTE: The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD 1080p4x camera (the
PrecisionHD 1080p4x* camera).
* Available for a limited period of time.
See the "Technical specifications" on page 35
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
The Physical Interface The Physical Interface
section for details.
Connecting the Camera Daisy Chaining
HDMI Video
USB
out
7
Video Output Format
Kensington lock
Power supply
Camera control
and power
The orange LED is lit during a call.
The green LED is continuously lit when
power is On, but it flickers when receiving
signals from the remote control.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
User Guide
Appendices