The Precisionhd 1080P 12X Camera - Cisco TelePresence PrecisionHD 1080P 12x User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

The PrecisionHD 1080p 12X camera

The orange LED illuminates while in
a call and flickers when there is an
incoming call.
The green LED is continuously
illuminated when power is On, but
it flickers when receiving signals
from the remote control.
When mounted (upside down) in
the Profile 65" and the Profile 65"
Dual, the LED is not visible.
D14640.03 PrecisionHD 1080p-720p Camera User Guide TC4.0, November 2010.
© 2010 Cisco Systems, Inc. All rights reserved.
The physical interface The physical interface Connecting the camera
The lens hood is
detachable.
We recommend that you
mount it to prevent stray
light from disturbing your
video experience.
Snap it on gently.
HDMI and HD-SDI
•
HDMI is the main video source. The maximum resolution is
1080p60.
•
HD-SDI* is the secondary video source. The maximum
resolution is 1080p30.
•
The HDMI and HD-SDI* can be used simultaneously. The
maximum resolution is 1080p30, if you want both to run with
the same resolution.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
•
When the camera is used with a Cisco Codec, power will be
supplied through Camera Control cable.
•
When the camera is used with non-Cisco codecs, you may
have to connect power separately.
Video output formats
Power
Camera
Supply
Control
Extra Camera
Out and for daisy
chaining*
Extra camera
For multi-camera setup, e.g. when you connect cameras in
daisy chain*:
•
•
Ethernet
For software upgrades on daisy chained cameras. Requires
software version TC3.0 or higher on the Codec C–series.
Kensington lock
The Kensington lock may be used to prevent the camera to be
moved from its place or to prevent theft.
6
PrecisionHD Camera User guide
Daisy chaning
Kensington lock
Ethernet
HDMI
RJ45
Video Out
HD-SDI Out*
The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
Use an extra camera cable between the Extra Camera
sockets.
* Not supported with Codec C20.
Appendices
www.cisco.com