Cisco TelePresence PrecisionHD Camera
Contents
Introduction
The PrecisionHD Camera 720p
HDMI
•
HDMI is the main video source.
•
The maximum resolution is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
•
When the camera is used with a Cisco Codec, power is
supplied through Camera Control cable.
•
When the camera is used with non-Cisco codecs, you may
have to connect power separately.
Extra camera
If you want to connect cameras in a daisy chain*:
•
The first camera in the chain is powered by the camera control
cable. The other cameras must use the 12V DC Power in.
•
Use an extra camera cable between the Extra Camera sockets.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
* Not supported with Codec C20
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
The Physical Interface
The Physical Interface
Connecting the Camera
VISCA Daisy chain
10
Daisy Chaining
Power in 12V DC
HDMI video out Camera control
Video Output Format
Appendices
Kensington lock
and power
The orange LED is lit during a call.
The green LED is continuously lit when
power is On, and flickers when receiving
signals from the remote control.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
User Guide