Cisco TelePresence PrecisionHD Camera
Contents
Introduction
The PrecisionHD 720p camera
The orange LED illuminates while in
a call and flickers when there is an
incoming call.
The green LED is continuously
illuminated when power is On, but
it flickers when receiving signals
from the remote control.
D14640.03 PrecisionHD 1080p-720p Camera User Guide TC4.0, November 2010.
© 2010 Cisco Systems, Inc. All rights reserved.
The physical interface
The physical interface
Connecting the camera
The lens hood (not
mounted on the camera in
the picture) is detachable.
We recommend that you
mount it to prevent stray
light from disturbing your
video experience.
Snap it on gently.
HDMI
•
HDMI is the main video source. The maximum resolution is
720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
•
When the camera is used with a Cisco Codec, power will be
supplied through Camera Control cable.
•
When the camera is used with non-Cisco codecs, you may
have to connect power separately.
Video output formats
VISCA
Power in
Daisy
12 V DC
chain
Extra camera
If you want to connect cameras in a daisy chain*:
•
•
Kensington lock
The Kensington lock may be used to prevent the camera to be
moved from its place or to prevent theft.
8
PrecisionHD Camera User guide
Daisy chaning
HDMI
Camera
Kensington
video
control &
lock
out
Power
The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
Use an extra camera cable between the Extra Camera
sockets.
* Not supported with Codec C20
Appendices
www.cisco.com