The Precisionhd 720P Camera - Cisco PrecisionHD 1080p 12X User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

The PrecisionHD 720p camera

The orange LED illuminates while in
a call and flickers when there is an
incoming call.
The green LED is continuously
illuminated when power is On,
but it flickers when receiving
signals from the remote control.
D14640.04 PrecisionHD 1080p-720p Camera User Guide
© 2010-2011 Cisco Systems, Inc. All rights reserved.
The physical interface The physical interface
The lens hood (not
mounted on the camera in
the picture) is detachable.
We recommend that you
mount it to prevent stray
light from disturbing your
video experience.
Snap it on gently.
HDMI
•
HDMI is the main video source. The maximum resolution
is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
•
When the camera is used with a Cisco Codec, power will
be supplied through Camera Control cable.
•
When the camera is used with non-Cisco codecs, you
may have to connect power separately.
, July 2011
.
Connecting the camera Video output formats
VISCA
Daisy
chain
8
PrecisionHD Camera User guide
Daisy chaning
Power in HDMI Camera
12 V DC video control &
out Power
Extra camera
If you want to connect cameras in a daisy chain*:
•
The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
•
Use an extra camera cable between the Extra Camera
sockets.
Kensington lock
The Kensington lock may be used to prevent the camera to
be moved from its place or to prevent theft.
Appendices
Kensington
lock
* Not supported with Codec C20
www.cisco.com