Brady 2461 Operator's Manual page 60

Communications (continued)
DISCOVERY
DHCP
²ENABLED
DISABLED
BOOTP
²ENABLED
DISABLED
RARP
²ENABLED
DISABLED
50
This is the address discovery method used
by the NIC Adapter if a static address is not
utilized. If no server for any of the discovery
methods is found, the static value specified
above is used.
þ Note: For faster NIC Adapter boot times,
disable any discovery methods not used.
Dynamic Host
Automatically assign IP address from a
DHCP Server.
DHCP is enabled by default.
WARNING! An IP Address assigned by a
DHCP has precedence over any static IP
Address stored in the NIC Adapter.
Disable DHCP.
þ Note:
Select this option to insure any
static IP stored is used by the NIC Adapter.
A UNIX based automatic IP address
assignment controlled by a BOOTP server.
BOOTP is enabled by default.
Disable BOOTP.
Reverse Address Resolution Protocol.
RARP is enabled by default.
Disable RARP. This should be selected if
RARP is not needed.
Control Protocol.