Brady 2461 Operator's Manual page 56

System Settings (continued)
SOP EMULATION
110 (PRODPLUS)
220 (ALLEGRO)
250 (PRODIGY)
²DISABLED
BACK AFTER PRINT
ENABLED
²DISABLED
MENU LANGUAGE
²ENGLISH
FRENCH
ITALIAN
GERMAN
SPANISH
USER DEFINED
46
Enables the <STX>O and <STX>f print
positioning commands to allow backward
compatibility with label formats designed
for other printers. (When changing these
values, the printer will automatically feed
two labels to setup the new print position.)
Emulates the Prodigy Plus
Emulates the Allegro
Emulates the Prodigy
No emulation, natural start of print position.
When the present distance is set with the
cutter, present sensor or GPIO option
enabled, this setting determines the timing
of the label back up.
Commands the printer to immediately back
up the label after the cut operation, the
GPIO start of print signal is received, or the
present sensor is clear. It provides the
advantage of faster throughput.
The printer will not initiate repositioning
until the next label is ready to print. May
help prevent the curling of the label edge.
Selects the language in which the menu
system messages and configuration label
are shown. Only languages that are resident
will be available.
English
French
Italian
German
Spanish
User defined, downloaded language(s).
®
printer.
®
printer.
™
printer.