Brady 2461 Operator's Manual page 52

System Settings (continued)
SET FACTORY DEFAULTS Parameters in this menu listing with the '²'
SET FACTORY DEFAULTS
FORMAT ATTRIBUTES
TRANSPARENT
²XOR
OPAQUE
IMAGING MODE
²MULTIPLE LABEL
SINGLE LABEL
42
symbol are the designated defaults.
Overwrite the current settings with the
factory default settings or, if selected, will
restore the Factory Setting File.
þ Note: The reset will be automatic. If no
Factory Setting File is used, all menu
settings will be restored except CUSTOM
ADJUSTMENTS, and the media and ribbon
sensor calibrations.
Affects the manner in which overlapping text
and graphics are treated as the label is
printed. Consult the Programmer's Manual
for details.
Intersecting text strings, images, and bar
codes will not be printed. (An odd number of
overlapping objects will print.)
Intersecting text strings, images, and bar
codes print on top of one another.
Interacting text strings, images, and bar
codes are obliterated by those formatted
last. Each character cell is treated as
opaque.
Instructs the printer whether to pre-image
the label format.
þ Note: This selection can affect the
accuracy of time-stamped labels and label
throughput.
The printer images multiple labels as
memory permits, achieving the fastest
throughput; however, if time-stamping, the
time will reflect the moment the label is
imaged rather than when actually printed.
The printer images the next label only after
the previous label has been successfully
printed. Single processing provides time-
stamps that are more accurate, but it slows
label throughput time.