Media And Ribbon Requirements - Brady 2461 Operator's Manual

Printing Specifications (continued)
Print Length Range:
with an optional cutter:
with an optional peel &
present mechanism:
Print Justification:
Flash Memory:
SDRAM Memory:

7.1 Media and Ribbon Requirements

Media Types:
Media Roll Capacity
Media Core:
Ribbon Core:
Ribbon Width Range
Ribbon Length
*
Wound out labels only.
**
Coated side 'in' or 'out' not interchangeable, dependent upon the Ribbon Supply Hub
type; the ribbon width to slightly exceed label width (including backing material).
.25" – 99" (6.4 mm – 2514.6 mm) 2461&3481
.25" – 55" (6.4 mm – 1397 mm) 6441
1.25" – 99" (31.8 mm – 2514.6 mm) 2461&3481
1.25" – 55" (31.8 mm – 1397 mm) 6441
1.50" – 99" (38 mm – 2514.6 mm) 2461&3481
1.50" – 55" (38 mm – 1397 mm) 6441
Left
1 MB 2461
2 MB 3481&6441
8 MB 2461
16 MB 3481&6441
Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat
on the printable side with no more than .0007"
(.018 mm) protrusions on the opposite side.
*
: 8" (203 mm) outer diameter
1.5" or 3.0" (38 mm or 76.2 mm) inner diameter
1.010"
Core not to protrude beyond ribbon edge.
**
: 1.0" – 4.5" (25.4 mm – 114.3 mm)
**
: 1968' (600 meters) maximum
.006" (25.6 mm .2 mm) inner diameter.
97