Brady 2461 Operator's Manual page 58

Communications (continued)
PARALLEL PORT B
þ Note: If the 'LOCKED' message appears when attempting to access the NIC
ADAPTER menu, the printer may have active print requests or multiple
users may be trying to access these parameters (for example, during
simultaneous telenet sessions).
NIC ADAPTER
IP ADDRESS
SUBNET MASK
DEFALUT GATEWAY
48
Same as Parallel Port A, for an optional
Ethernet connection.
displays 'NOT INSTALLED' when accessed.
Network Interface Card Adapter (optional).
If not present,
INSTALLED' when accessed.
NIC Adapter
V3.6/5(010212) DM or later is required to
support the described functionality.
After making changes to these parameters,
save the changes, exit the menu system, and
cycle the printer's power 'Off' and 'On' for
the changes to take effect.
þ Note: With the NIC Adapter installed, a
boot process (taking up to two minutes,
depending upon the configuration) must
be completed
recognizes the option as 'installed'. During
this time, the NIC Adapter will not be
accessible or
INSTALLED" will be indicated when in the
menu system or on a Configuration Label.
After the process, you will be able to
configure the options provided using the
menu system.
The static IP address of the NIC Adapter.
This is in standard dotted-decimal format.
The static subnet assigned to the NIC
Adapter.
The network gateway address the NIC
Adapter should use.
If not present, this
this displays
firmware
before the printer
configurable;
'NOT
version
"NOT