Present Sensor - Brady 2461 Operator's Manual

Peel and Present Mechanism
)
(requires the Internal Rewind option
An output control device that automatically separates printed labels from the
backing material and allows subsequent printing to occur only after the removal
of a previously printed label. Minimum label length for peeling is 1.5 inches (38
mm).

Present Sensor

An output control device that allows subsequent printing to occur only after the
removal of a previously printed label.
RS-422 Serial Interface*
Single-drop interface hardware to support greater distances from the host at
communication rates of up to 38,400 baud.
Thermal Transfer
(specify configuration at time of order)
A printing method that uses ribbon to produce exceptional image clarity, as
compared to most direct thermal media types. This option must be specified for
use with either 'coated side in' ribbon or 'coated side out' ribbon.
Twinax/Coax Interface
A slide-in circuit card assembly that provides connectivity to AS/400 and
System/3X Twinax host system or 3270-type host system. Cable included.
*Item unavailable for the 2461 model.
4