Reset - NEC NEAX Express Service & Reference Manual

Reset

Selecting Reset from the Action menu generates the Reset dialog so that you can
remotely reset the server with post-reset options.
Options available in the dialog are:
!
System Reset - resets the server with the selected post-reset options. This operation
is not allowed if the server is configured in RESTRICTED mode for EMP
operations.
!
Post-reset Option - sets the post-reset option that will be effective after reset. The
options are EMP active or BIOS redirection. The default selection is EMP active.
!
Cancel - exits the Connect dialog without any action taken.
!
Help - displays dialog level help information.
Reset Dialog
Emergency Management Port C-11