Removing A 5.25-Inch Device - NEC NEAX Express Service & Reference Manual

Removing a 5.25-Inch Device

1. Power off the system, unplug the system power cords, and remove the
appropriate side panel depending upon the bay you are removing the media
device from and as described earlier in this chapter.
2. Open the front door as described earlier in this chapter.
3. Observe static precautions. Use an antistatic wrist strap.
Observe static precautions. Use an antistatic wrist strap.
4. Carefully remove the front system bezel by releasing its two plastic snap
tabs on the back of the bezel and pulling it out (see Figure below).
4-34 Disassembly and Reassembly
! CAUTION
Removing the Front System Bezel