Security Menu - NEC NEAX Express Service & Reference Manual

Security Menu

Note:
a password for entering Setup. The passwords are not case
sensitive.
Feature
User Password is
Supervisor
Password is
Set User
Password
Set Supervisor
Password
Password on Boot
Fixed Disk Boot
Sector
Secure Mode
Timer
3-12 Configuring Your System
Enabling the Supervisor Password field requires
Choices Description
Clear Status only; user cannot
Set modify. Once set, this can be
disabled by setting it to a null
string, or by clearing
password jumper on system
board (see System Board
Jumpers in
Chapter 3).
Clear Status only; user cannot
Set modify.
Press ENTER When the <Enter> key is
pressed, the user is prompted
for a password; press ESC
key to abort. Once set, this
can be disabled by setting it
to a null string, or by clearing
password jumper on system
board (refer to System Board
Jumpers in this chapter).
Press ENTER When the <Enter> key is
pressed, the user is prompted
for a password; press ESC
key to abort. Once set, this
can be disabled by setting it
to a null string, or by clearing
password jumper on system
board (refer to System Board
Jumpers in this chapter).
Disabled Requires password entry
Enabled before boot. System will
remain in secure mode until
password is entered.
Password on Boot takes
precedence over Secure
Mode Boot.
Normal Write-protects boot sector on
Write Protect hard disk to protect against
viruses.
1 min Period of key/PS/2 mouse
2 min inactivity specified for secure
5 min mode to activate. A
10 min password is required for
20 min secure mode to function.
1 hr Cannot be enabled unless at
2 hr least one password is
enabled.
Your Setting